Led lights manufacturer today: Confirm what design pattern for the whole system you prefer. There are about 4 design shapes for the whole lighting system- L shape, I Shape, parallel lines Shape, and Square shape. Square shape. It is suitable for living rooms, and offices. U Shape: Mainly used for living room. L Shape: Good for use in corridors, living rooms, and cloakrooms. I Shape: For the living room, dining room, and kitchen room. Choosing a suitable magnetic track rail: Recessed magnetic track: It is suitable for new houses that have not yet suspended ceilings. It is necessary to make grooves and pre-embed tracks, and then press them with the ceiling. Trimless magnetic rail: It is used in the room where the ceiling has been made, and the hole is directly fixed on the ceiling plasterboard. Surface / Pendant magnet track: Mainly used for places that are without false ceilings or not good for making plasterboard such as supermarkets, offices, etc. See extra information at magnetic track system.
How to choose LED landscape lighting? Before buying LED outdoor landscape lighting, there are some essential things to take into consideration. The first thing to consider is how much light you need? You can choose from spotlights, floodlights, or wall packs. There are different wattages available depending on the size of your place. Another thing to consider is the kind of light that you need. As there are three types of lighting fixtures, you can choose from fully shielded, partially shielded, and non-shielded lighting fixtures. Before buying LED landscape lighting, you also need to consider the lumens per watt rating. This reading will tell you how much light is being put out by a fixture. A lower number means that the fixture emits more lumens, while a higher number indicates fewer lumens emitted from that fixture.
When choosing exterior led floodlights, lumen value is more important than power value. Power value (Wattage) measures the energy required to illuminate the product, and lumens determines the brightness of the lamp. This means that the more lumens of the product, the brighter the lamp. Consumers should not choose projection lamps based on the power value (watts), but should consider how much brightness (lumens) they provide us.
LED floodlights can also be called Outdoor LED spotlights, or LED projectors, which are large-area lighting fixtures used outdoors. It has made technical improvements and innovations on the basis of traditional metal halide floodlights and HPS floodlight fixtures. Use LED solid cold light source to replace traditional metal halide bulb and HPS bulb light source. LED flood light does not contain any toxic gas, will not pollute the environment, and it can be recycled. Longest Lifespan: Most of the led lights we produced in 2013 until now are still working well. A long lifespan will save you much more cost for replacements.
All the magnetic linear track light systems can be with a smart solution. 0-10V dimmable / DALI dimmable; 2.4G WIFI, Bluetooth mesh, Zigbee smart magnet track lighting. Through a smart gateway(hub), they will be 3CCT color-changing and tunable in brightness by TUYA APP in a smartphone, and it is also available controlled by a remote controller, smart control panel, or smart speaker like Google Home, Amazon Alexa, etc. This smart magnetic track light is with Zigbee solution, remote control by TUYA APP on a smartphone, Google Home, Amazon Alexa speakers through the WIFI, and smart Zigbee Gateway(hub). It is tunable in color temperature (3CCT Color changing), and dimmable brightness. For the whole system, including low voltage DC48V smart magnetic linear lights, fold spotlights, magnetic grille spotlights, track spotlights, pendant lights, etc, available DIY light luminaires freely onto magnetic rail tracks. It is the perfect choice to do residential lighting for the kitchen, living room, and dining room.
Exterior landscape flood lights: This type of floodlight is mainly used for lighting effects of outdoor landscapes, such as illuminating trees and rockery at night. Their power is mostly less than 50W, and their light-emitting angle is mostly 30°. Mostly used in parks, squares and other places. Low voltage LED flood lights: The input voltage of this kind of floodlight is generally AC/DC12V 24V 36V 48V 60V. Compared with the high-voltage 110Volt or 220VAC input floodlight, the low voltage type will be safer, especially when it is installed outdoors, and easy to be touched by human being. Mostly used in special places such as ships, mines, petrochemicals, petrol stations, etc.
Maintenance: Solar street lights require regular maintenance to ensure they are functioning properly. This includes cleaning the panels, replacing batteries, and checking the wiring. Weather Dependent: Solar street lights are dependent on the weather, and may not be able to provide enough light during cloudy or rainy days. Vandalism: Solar street lights are vulnerable to vandalism, as they are often located in remote areas. How long does it take for a solar street light to charge? The amount of time it takes for a solar street light to charge depends on the size of the battery, the amount of sunlight available, and the type of solar panel used. Generally, it takes between 6 and 12 hours for a solar street light to charge fully.
As a reliable High power Led floodlight manufacturer, supplier, and factory in China, we provide the best quality flood lamps with 50W/modular, 100W/modular, 200W/modular, and 250w/modular available. Their wattage includes 50W 100W 150W 200W 250W 300W 400W 500W 600W 1000W 1200W 1500W 2000W Max. They consist of an aluminum body and PC lens, the IP grade can be IP66. Using the Meanwell/DONE/MOSO/SOSEN/PHILIPS driver and Osram, CREE, Philips Chips, the guarantee is a 5years warranty, lumens output range from 120lm/W-160lm/W. Widely applied for outdoor environments such as high-mast lighting, tunnel lights, and stadium floodlights ( football field, tennis court lighting, basketball lighting, etc.).
Hybrid Solar Street Lights: Hybrid solar street lights are a combination of standalone and grid-connected solar street lights. They are powered by a solar panel and battery combination and are typically used in areas where grid power is available but unreliable. All-in-one street lights: It is also called integrated solar street lights, there are including a street light head, solar panel, solar controller, and Li-batter into a light fixture. It is easiest to do the installation.
The flicker/flashing of led lights is mainly related to LED chips or LED driver (power supply), and LED floodlights is no exception. First, the quality of LED chips. Normal single 1W led chips withstand current: 280-300mA, voltage: 3.0-3.4V. If you use low-quality LED chips, it will not match the standard LED drive power parameters. Once the Led chips are subjected to excessive current, it will flash on and off. In severe cases, the gold wire or copper wire built in the chips will be burned, causing the chips to not light up. Discover additional info on https://grnled.com/.
GRNLED brand from greenriy Technology Co., Ltd ( another brand is Golumen) was founded in 2014, is one of the leading LED light manufacturers, factories & suppliers in China, accepting OEM, ODM, and SKD orders. We have rich experience in production & research development for led light types. For our long-term customers, we also provide services to help them to purchase any products in China if needed. All of the things we can deal with, including looking for suppliers, doing a quality inspection, arranging shipping, etc. What we do is that our customers only need to sell led lights, the other things all we bear.