Coriolis mass flowmeter manufacturer today: What is the difference between a mass flowmeter and a volumetric flowmeter? Differene between Mass flow vs volumetric flow.If high accuracy is not required when measuring volumetric flow, volumetric flow meters are recommended. However, to compare results, volume flow meters need to be compensated for temperature and pressure. A mass flow meter, on the other hand, measures flow rate regardless of gas pressure or temperature. Find more information on turbine mass flow meter.
Flow measurement of some low-viscosity oils, such as gasoline, kerosene, diesel, and heavy oil, residual oil, etc. whose viscosity is reduced by heating. Water flow measurement of large-diameter pipelines, among which the full-tube vortex flowmeter is mainly used for small and medium diameter pipes, while the insertion vortex flowmeter can be used for large-diameter (DN≥300mm) pipeline flow measurement. It is widely used in urban water pipelines and industrial water mains in chemical, electric power, metallurgy, papermaking, chemical fiber and other enterprises.
It is the existence of domestic brands that has forced the prices of foreign brands to drop by 1/2-2/3 in recent years. The production and R&D investment of natural gas turbine meter is relatively large, and the prices of enterprises with certain strength will also be higher in domestic brands. But even then, they are only about half the price of high-end international brands. Therefore, it is recommended that users choose carefully on the basis of comprehensive consideration of their respective use requirements and procurement costs. Don’t pursue low prices too much, nor do you need to pursue imported brands inappropriately.
Fork density meter can measure the density, concentration, gravity, temperature, and accuracy of liquids without being affected by temperature, pressure, density, and viscosity. Applications of micro motion fork density meter: Pipeline interface inspection, slurry solids monitoring and corrosive acid concentration control; density and concentration monitoring that require rapid response. Continuously measure pipelines in real-time through pipelines and storage tanks to increase installation flexibility and choose from a variety of corrosion-resistant materials to measure the density and concentration of key chemicals. Supports protocols connected to DCS, PLC and flow computers. Pass Hazardous Area Approved Head-Mounted Transmitters extend the range of use, the transmitter supports local configuration and display. Find even more details at https://www.bjssae.com/.
Inner software: For the inner software, we can even customize the inner software with your own company’s name and information. Standard color: If the ordering quantity is big , we can customize the color of the transmitters on the coriolis mass flow meters for you. The standard color is dark grey. We are providing the complete measuring solutions, not only one single unit of coriolis mass flow meter. Sometimes even though it is not the problem of our coriolis mass flow meters or thermal mass flow meter, we will still help you solve the problems.
When the vortex gas flow meter is installed behind the pressure reducing valve, the saturated steam suddenly decompresses greatly, the fluid expands adiabatically, the water droplets partially evaporate, and at the same time absorbs the heat of vaporization from the liquid and vapor phases, reducing the temperature of the vapor and liquid phases. If the temperature is not lowered much or the humidity is higher before evaporation, the temperature will quickly drop to the saturation temperature corresponding to the new pressure, and a new equilibrium will be established. At this time, the steam is still saturated steam. If the pressure drops a lot or the humidity before evaporation If the temperature is lower, the temperature is still higher than the saturation temperature corresponding to the new pressure due to the evaporation of water droplets, and the steam becomes superheated steam.
The Insertion Density Meters are equiped with the microprocessors inside, so the sensor could complete the signal conditioning, calculation and diagnosis functions, and it does not need the remote eletronic devices for processing. Typical industries applied include the petrochemical industiry, electricity power industry, wine industry, food industry, pharmaceutical industry, and mineral processing (such as, clay, carbonate, silicate, etc. ) For sepecific applications, the Insertion Density Meters are largely used in the interface detection of the multi-product production lines, density detection of the mixed liquid, end monitoring of the reaction kettle, and the separator interface detection.