Premium centrifuge separator wholesale manufacturer: The variable pump impeller technology can adjust the thickness of the liquid layer inside the machine while it is running, so that the Decanter centrifuge can be quickly adjusted without stopping to achieve separation effect. New independent drive system. The structural feature of the new independent drive system is that the drive of the rotary cylinder and the screw are respectively driven by two vertical variable frequency motors. A new type of gearbox is used to connect the drum and the screw. In addition to withstanding high torque, this gearbox can also independently rotate the screw without the drum rotating. Through the above discussion and analysis, it is not difficult to see that the influence of structural design on the processing capacity of decanter centrifuge is mainly reflected in the selection and design of mechanical parameters and corresponding auxiliary equipment. If each problem is considered comprehensively and concretely, it can also be considered comprehensively and concretely. The decanter centrifuge can better serve the solid-liquid separation field of various industries in our country. See additional information on Industrial Centrifuge Manufacturer.
The fundamental principles of operation for the 2 phase decanter centrifuge and 3-phase Shenzhou Machinery decanter centrifuges are identical to those of the horizontal decanter centrifuge. To separate substances with different densities, the equipment uses a high-speed rotating assembly to create an acceleration inside the bowl that is thousands of times stronger than gravity. Then, the relative motion between the bowl and the screw is generated by the differential gearbox, allowing for the separation of the substances. In contrast, 3 phase decanter centrifuges use centripetal pump technology to achieve solid-liquid-liquid three-phase separation, as opposed to Shenzhou Machinery 2-phase centrifuges, which are utilized for solid-liquid two-phase separation and discharge the solid slag and separation liquid from an opening at the bottom of the equipment collection box. Under the pressure of the centripetal pump, the heavy liquid phase is discharged through the flow outlet on the impeller. In contrast, gravity sends the solid slag and light liquid phase down from the bottom opening of the equipment collection box.
The most important factor to keep in mind when manufacturing decanter centrifuge components or designing a completely new decanter assembly using a cone centrifuge parts casting machine is that the decanter bowl and tube wall thickness must be thin enough to meet design specifications while still providing each Structural integrity required for components. Stainless steel cylinders and conical bowls for decanter centrifuges are manufactured from the centrifugal casting process. Decanter Bowls, Bowl Cones, and Bowl Cylinders are typically made in various dimensions through centrifugal casting and additional machining. These can be purchased as a single part or already assembled/welded with a stainless-steel cylinder.
Deciding on a decanter centrifuge for laboratory use, particularly among 2-phase and 3-phase centrifuges, calls for a deep understanding of the lab’s desires. This relies on the knowledge to be processed, desired efficiency, area constraints, and budget. 2-phase decanter centrifuges are versatile because they separate solids from liquids without problems. But, 3-phase models, which separate immiscible beverages and solids, are exceptional for complex separations. This guide provided the necessary information regarding decanter centrifuges and their basic features, workings, and evidence comparison. Two immiscible liquids or a liquid and solid can be separated using the two-phase centrifuge. The separation happens automatically and in real-time, without human intervention. Environmental protection, sewage treatment, the chemical industry, food processing, fermentation, medicine, and mining metal and non-metal minerals are just a few of the many applications for two-phase centrifuges. Find even more info on lnszjx.com.
Shenzhou Machinery is a subsidiary of Shenzhou Group.Which was established in 1980,conveying an area of 80000M2 ,there are 2500 staffs and employee in our company.200 of them are technicians and engineers.It has obtained the approvals and certifications of both CE and ISO. Some of our machines gained the new technology invent patent.We are on of the world’s leading manufacturers of decanter centrifuge,disc centrifuge,tubular centrifuge,separation systems and drying equipment.Now there are over 180 series or decanter centrifuges and disc separators used home and abroad.Including U.S.A , Canada ,Australia,Russia ,Brazil,Singapore and so on totally 70 countries.
With the continuous strengthening of people’s environmental awareness and the continuous improvement of environmental policies and regulations, sewage treatment projects and engineering in various industries have increased sharply, and various solid-liquid separation equipment has also been continuously applied in engineering practice. The continuous progress of science and technology, the emergence of new products, technologies, and materials, as well as the increasing economic and technological requirements for service equipment and investment cost indicators in engineering projects, have significantly increased the start-up rate and continuous working time of all equipment in various engineering projects. This has put forward new and higher requirements for Decanter centrifuges in the field of sludge dewatering.