Metal zip ties and PG cable glands buyer tips? The S-Tec ATEX Ex e/t series and the watertight WADI-Tec ATEX EX e/t fittings come in all common thread types and with extensive accessories: filler plugs, extensions, reductions, thread adapters and much more. The ATEX Ex d/e/t series combines all three types of ignition protection. They can be used in temperature ranges from -60°C to 200°C and have protection type IP 66/68. The abundance of varieties of cableglandsonline.com ATEX cable glands offers solutions for nearly every clamping area and furthermore the safety standards for electrical supplies in areas exposed to explosion hazards around the world.
To determine the right cable gland size for both types, you need to consider: Cable diameter, Construction size, Cable material. For armoured cables, you also need to consider: The diameter of the inner bedding, The diameter of the lead covering, The short circuit fault rating of the cable armour, The type and size of the armour braid. Choose a material type: Different cable gland materials perform differently depending on the application, environment and cable type.
Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Cleanroom cable glands: Suitable for use in a cleanroom environment with the associated properties of maintaining positive pressure, prevention of dust and fluid ingress, etc. See more details on PG Cable Gland.
The CMP E1FX/M cable gland is suitable for use with all forms of equipment protection permitted in Zone 1 provided always that the prevailing code of practice, installation and maintenance is observed ie. IEC60079-14. Locate the cable gland Armour Cone ensuring the correct side of the cone is outermost – grooved for braid/tape armour and stepped for SWA cables. Pass the cable through the cable gland until the wire armour is engaged with the cone. Spread the wire armour evenly around the cone.
Selecting Cable Glands – Items to consider when selecting a cable gland for a particular installation include: Degree of Ingress Protection required. See our page on IP ratings. Certification of gland for use in Hazardous areas. Normal or barrier gland required.
CableGlandsOnline.com is a leading manufacturer of cable glands located in Mongkok, Kowloon, Hong Kong. Because of our good production management and large volume we are able to sell you the best cable glands at competitive prices. CableGlandsOnline.com is your cable glands online warehouse, just a click away. Source: here.