Best rated synthetic blood penetration test equipment provider? High transparent organic glass to cover the instrument,built-in LED lights can be clearly observed sample experimental process. Display uses the touch screen, interface is simple and easy to understand, touch sensitive, easy to operate. Instrument can storage experiment result and print, and support online work with professional computer software. When normal use, its forbidden to remove the cover.Please pay attention to close the air source when replace diaphragm, orifice and test cover. Please confirm there is no air pressure in cylinder,please be careful. Read even more info on bacterial filtration efficiency test.
GESTER is professionally engaged in manufacture and R&D of Textile Testing Equipment with 20+ years experience, including Fabrics tests, Yarn& Fibre tests, Color fastness tests, Flammability tests etc. Various in styles, GESTER instruments’s textile testing equipment can meet the needs of different customers.GESTER insists on the use of high-quality materials and advanced technology to manufacture textile testing instruments. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.GESTER serves every customer with the standards of high efficiency, good quality, and rapid response.
Testing to ASTM D4060 involves mounting a flat specimen to a turntable that rotates horizontally at a fixed speed. Two arms, each supporting an abrading wheel, are then lowered so that each wheel touches the surface. Before starting the test, a “suction arm” is lowered between the wheels to remove the abraded material from the sample’s surface. The turntable then starts rotating forcing rub-wear action of the wheels against the sample’s surface for the specified number of cycles or until a given mass of coating has been lost or until the wheels start exposing the substrate.
How to maintain the universal testing equipment? The part of the utm electronic universal test instrument is often wiped clean and kept clean. Please wipe with electroplating oil to prevent rust and light. Please add lubricating oil to the power screw and screw part to ensure the transmission is sensitive. the panel, please wipe with a dry cloth, to prevent water, so as not to damage IC electronic parts. Please fix all fixtures and fittings and wipe the anti-rust oil to prevent rust.
Equip with procedure time counter, digital temperature controller, auto temperature & time control, it has alarm hint while experiment ending.Can customize cup compound mode according to customers requirements. Samples Preparation: Place the samples and multi-fiber adjacent fabric under the constant temperature and humidity (temperature: 21±1℃, humidity: 65%±3%) for 4 hours. Cut 40mm*100mm specimen and multi-fiber adjacent fabric, and suture the specimen and multi-fiber adjacent fabric face to face along one short side.
The AC servo drive system with low noise and wide range of applications. Pneumatic Bursting Strength Tester Test Methods: Constant Time Bursting. The tester bring saving and printing functions and support on-line operation. Provide on-line interfaces, professional detection software which can be used to analysis testing result. Summary of Test Method: A specimen is clamped over an expandable diaphragm. The diaphragm is expanded by fluid pressure to the point of specimen rupture. The difference between the total pressure required to rupture the specimen and the pressure required to inflate the diaphragm is reported as the bursting strength. Discover additional details on https://www.gesterinstruments.com/.